Martian 2 Camera Mount Battery Holder Combo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the idea of a battery holder but didn't see anything already made to work with a camera mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I liked the idea of a battery holder but didn't see anything already made to work with a camera mount. I just combined 2 parts already made.
Print instructions
Category: R/C Vehicles Summary
I liked the idea of a battery holder but didn't see anything already made to work with a camera mount. I just combined 2 parts already made.
Print Settings
Printer:
Anet A8
Rafts:
No
</div>Supports:No
Resolution:
.3
</div>Infill:50
Notes:
I had to cut down a battery strap to fit through the camera mount slot. original was designed for a 10mm strap. i cut 5mm off each side of 20mm battery strap.
update 7/30 had an esc burn out and crashed hard from about 50ft. hit nose first and the camera mount survived, camera and battery stayed in place. printed Pla 50% infill. i'll call this a successful test.update 7/28/17 strengthened the mount, raised the sides of the sled to hold battery better. widened the slot to make inserting battery strap easier.
update 7/27/17 just did some testing and broke the camera mount on first crash. looks like the battery slid forward and snapped the back of the camera mount. gonna label this a work in progress and make some adjustments. I did print this in pla with 25% infill. probably should have gone with abs 50%.