Martian 2 Camera Mount Battery Holder Combo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I liked the idea of a battery holder but didn't see anything already made to work with a camera mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I liked the idea of a battery holder but didn't see anything already made to work with a camera mount. I just combined 2 parts already made.
Print instructions
Category: R/C Vehicles Summary
I liked the idea of a battery holder but didn't see anything already made to work with a camera mount. I just combined 2 parts already made.
Print Settings
Printer:
Anet A8
Rafts:
No
</div>Supports:No
Resolution:
.3
</div>Infill:50
Notes:
I had to cut down a battery strap to fit through the camera mount slot. original was designed for a 10mm strap. i cut 5mm off each side of 20mm battery strap.
update 7/30 had an esc burn out and crashed hard from about 50ft. hit nose first and the camera mount survived, camera and battery stayed in place. printed Pla 50% infill. i'll call this a successful test.update 7/28/17 strengthened the mount, raised the sides of the sled to hold battery better. widened the slot to make inserting battery strap easier.
update 7/27/17 just did some testing and broke the camera mount on first crash. looks like the battery slid forward and snapped the back of the camera mount. gonna label this a work in progress and make some adjustments. I did print this in pla with 25% infill. probably should have gone with abs 50%.