VW T5 Dashboard iPhone 12 Pro holder with MagSafe charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Volkswagen Transporter T5 (2007) Dashboard iPhone 12 Pro holder with MagSafe charger With the space for a charging…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 4763
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
You are doing me a big favor by clicking the Like button :-)
Volkswagen Transporter T5 (2007) Dashboard iPhone 12 Pro holder with MagSafe charger
With the space for a charging cable and with a slot for a parking ticket
The base is attached to the dashboard with double-sided tape.
I have a non-slip mat glued on the base, but of course that is not necessary.
Because ABS and ASA are difficult to print because the fan is off, the spacers are printed separately. If you want to use them, glue these with superglue.It is not necessary because there is a tight magnet in the MagSafe charger.
ASA and ABS are difficult to print even with a printer in a closure.
The solution to this is increase the skirt to 60 layers or more. There will be no cold or draft and your print will remain attached to the bed.
Use 2x M5 x 10mm Cooling Fan mount screws.