GPD Win 4 Front Covers Grip/No Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are front covers for the GPD Win 4. Works with grip/no grip. Should work with thumb grips as well!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 451
- Wydruki
- 1
- Wyświetlenia
- 2838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Front covers for the GPD Win 4
This will work with Grips/No Grips.
The No-Grip model can be printed as is and should just fit right now. Works with most thumb grips I've tried.
I would highly suggest using some sort of felt tape on the screen portion that makes contact with your Win 4 just to ensure no scratching.
On the Grip model, you might need to scale this up on the Z-Axis by 1-2 percent. I've scaled it down to fit with the grip that I sell.
And per usual, if you don't have a 3D printer, I sell them here: https://www.etsy.com/shop/DinoMeetsDonut
I would print these standing up.
100% needs supports, at least touching the print bed.
I would also suggest a brim/raft for adhesion.
**Excuse any banding on the photos, I apparently am in desperate need of drying my prototyping filament.