Demibot HDZero 540p Nano Cam Mount

The 540p nano cam is pretty small and tends to get the frame in view easily with it's short length, so I pushed it out in front of the posts with a protective bumper.  No frame in view at 25 degrees, might get some at really high angles.

Two versions are included, with 25 degree stop/supports and a free rotation version if you don't like 25 degrees.

I use 30% fan, 40mm/s, .16 layer height and get good results.  The dome overhang likes to curl fairly easily if you print too fast or with no fan.

A note on screws.  I sized it for M2x4mm screws with a 4.5mm head that takes a 2mm driver like the ones that come with foxeer cams, they're much nicer than the dinky little ones that come with the cam.  Only 3 and 5 mm screws came in the box with the cam, so you'll have to source different screws or space it with washers.  Also, put your screws in before you set it down on the post or you may not get them in.

Step file is included so you can easily customize your own version also.

Updated: Added a third version with an integral ELRS mount for the Radiomaster RP1 style ELRS antenna.  I flew it once so far at F1000 mode and had no range issues with it mounted here.  It might still be better mounted low on the arm, but you'll never damage an antenna with it here.