IVAR & DIN-Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea IVAR and DIN-Rail (Update 29.09.2025)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed 2 Clamps between a DIN-Rail and my IVAR-Regal from Ikea.
Most of them for my Headless Raspberry Pis and the Power Supplies.
And some more, see Example-Pictures.
You need for 2 Clamps:
2 Screws M4 x 10 mm (Not Longer!)
2 Washer M4 (Look for: “Large diameter Washer”, in German: “Karosseriescheiben”)
2 Nuts M4
The Hole is for to remove the Nut.
Nozzle: 0.4 mm
Filament: PETG (Here in White for Picture, normaly I use Black)
Made in FreeCAD 0.20.2, Sketch is in Files
Update: 23.06.2023 I'm changed the measure from the Nut-Hole from 7.2mm to 7.0mm
Update: 05.11.2024
New Sketch, now with Spreadsheet. With M5 Screws and Nuts.
Now you can change the Screw in the Spreadsheet, look to the Screenshot.
Made with FreeCAD 0.21.2, Prusaslicer 2.8.1 and Prusa MK4S
Update: 29.09.2025
New Version 5.3, but same Funktion as the old versions.
Screw M5x10mm (Not longer!)
Nut M5
New Sketch, without Spreadsheet.
Made with FreeCAD 1.0.2, PrusaSlicer 2.93, OrcaSlicer 2.3.0
Printer: Prusa MK4S
Nozzle: 0,4mm
Layer: 0,2mm
Filament: PETG