7-segment time + date + weather display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,54 € – 1,88 € netto (bez VAT)
Dla pliku: Lid_0.3mm_PLA_MK3S_1h24m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,71 € netto (środek widełek).
- Masa podana przez autora
- 28 g
- Czas druku podany przez autora
- 1,39 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
7-segment time + date + weather display
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
7-segment time + date + weather display.
Functions:
- Shows time + date + weather (temperature and humidity) for your location.
- You can choose in the settings if you want to have the temperature as Celsius or Fahrenheit value.
- All settings can be configured in the “settings.h” file in the Arduino IDE.
- You will need to add the settings for your WiFi and optional for weather information.
- Update 25.06.2023: Working on software version V2.0.0: (Currently in test status)
- Added web interface to store the settings in the ESP32 flash instead of the code.
- Removed the “settings.h” file, because all settings can be set in the web interface
- Added these functions in the web interface:
- Integration of my new WiFi Manager to store the WiFi and other initial settings in the ESP32.
- Optional night mode with reduced or to off set led intensity during night times.
- Brightness control via web interface.
- Date format switch for “DDMMYYYY” or “MMDDYYYY” format.
- During startup the from your router received IP-address is shown.
- Restart of the clock can be done via web interface.
- All settings can be deleted via web interface incl. the WiFi config.
- If your router cannot be reached anymore the WiFi config gets deleted.
- Many information values of the ESP32 are shown.
- Your NTP time server and time zone can be set in the inter too.
- The weather data update every 5 minutes.
- Update 27.06.2023: Software version V2.0.0 released: GitHub
- Update 07.07.2023: On intensity setting 0 the display is turned off now. See V2.1.0.
- Update 01.10.2023: Added some additional display outputs and fixed a bug. See V2.1.1.
- Update 02.12.2023: Software now supports negative temperature values. Who could think of these in summer? ;-) See V2.2.1 on GitHub.
Web interface:
New WiFi and settings manager:
Video:
Parts needed:
- 1x ESP32 NodeMCU
- 3x MAX7219 LED 7-segment display TM1637
- 1x Micro-USB cable
- 1x USB 5V/2A power supply
- 1x Some wires in different colors
- 4x M3x12mm countersunk screws
- 2x Small cable ties to secure the USB cable and ESP32 in the case
Wiring instructions:
| ESP32: | Display A: | Display B: | Display C: | Wire color: |
| 3V3 | VCC | VCC | VCC | red |
| GND | GND | GND | GND | black |
| G27 | DIN | green | ||
| G12 | CS | white | ||
| G14 | CLK | grey | ||
| G33 | DIN | green | ||
| G26 | CS | white | ||
| G25 | CLK | grey | ||
| G15 | DIN | green | ||
| G32 | CS | white | ||
| G13 | CLK | grey |
Code download:
- The code can be found on my GitHub repository.
Printing instructions:
- 0.3 draft profile used
- Textured sheet used
- Avoid crossing parameters activated
- Fuzzy skin for outside walls activated
- No supports required
- No brim required
Happy printing =)