Skrunkly with interchangeable sides [Rin Penrose]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added space for magnets so colors can be changed quickly, L/W: 8mm, H: 2.8mm, 2x sized, Glue rqd.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I have made slight changes to the model to include space for 2 magnets, 8mm in diameter with a thickness of around 2,8mm.
A total of 4 magnets are required and you do need to glue them into the space.
The model is also twice the size so that I can fit comfortably 2 magnets into the model, so that it wont spin.
I can also change the thickness of the magnet space if you need it.
Do note that you will have to print both files, probably in different colours.
Also the front part is not yet seperate. I currently do not have the experince to do that, but I am learning. Model will be updated once i do that.
If there are problems please do tell me as I do not currently have access to my 3d printer due to technical issues.
All credits go to the original owner of the model, which this is based on. If you want me to take this down, please contact me as soon as possible.