SodaStream bottle holder desk clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got tired of knocking my bottle off my desk, so I made a bottle holder desk clamp.
- Ocena
- 4,5 / 5
- Polubienia
- 43
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 1065
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
My SodaStream bottle was always standing on my desk or next to me on the ground, but I kept knocking it over. So I found the perfect solution to clamp it to the side of my desk. Now, my bottle is still within arm's reach, it's not taking up space on my desk, and I can't accidentally hit it with my arms or legs.
I haven't tested it with other bottle's only with the big and the small one from SodaStream.
The bottle holder is printed in 3 parts. The holder, the screw and the top of the screw that clamps to the table.
The holder needs support for the upper part of the clamp, but try to reduce or skip supports in the lower bolt because it can damage the thread. Removing it was particularly challenging. I was going to separate the bolt from the clamp, but after some testing, it still works for me.
Note: watch out you don't overtighten the clamp, if you have printed
The original clamp supports tables with a thickness of 1 inch.
UPDATE:
I have added an additional version that provides extra support for tables up to 2 inches.