1 / 2
Solder stand with SAL stone block holder and brass wire wool holder — zdjęcie 1
1 / 2

Solder stand with SAL stone block holder and brass wire wool holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Solder stand with SAL stone block holder and brass wire wool holder

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Stand to hold a “standard” soldering iron holder. Brass wore wool and a SAL ammoniac block for cleaning the tip. No supports needed, add brim to minimize curling. Wouldnt reccomend printing in ABS since it will SMELL a lot if you accidently touch it with the soldering iron tip.

PETG is reccomended.

The iron tip holders attachment piece is a trapezoid With the top bar being 16.5mm the bottom bar being 14mm and the height being 20mm

Tagi