Phone Mag Mount to Ballhead Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a Wizgear UG-Air-vent-Magnetic-mount to any standard tripod head or mini ball head like this one Giottos mini…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapts a Wizgear UG-Air-vent-Magnetic-mount to any standard tripod head or mini ball head like
this one Giottos mini ball head MH1004-320.
Print instructions
Adapts a Wizgear UG-Air-vent-Magnetic-mount to any standard tripod head or mini ball head like
this one Giottos mini ball head MH1004-320. Provides a quick and simple way to mount your
phone in many different orientations.
Requires a 1/4-20 nut.
Prints well without supports.
</div> Post-PrintingRequires a 1/4-20 nut.
1| Disassemble the mag mount.
2| Slip the 1/4-20 nut into the slot on the printed part.
3| Assemble the magnet plate and rubber cover to the printed adapter using the center screw from the mag mount.
4| Attach threaded stud on the ball head to the nut inside the adapter.
5| Attach the ball head to whatever you choose. It comes with a thread adapter to allow you to use a 1/4-20 machine screw or a 3/8-16 machine screw. For my application I removed part of my dashboard, drilled a 3/8" hole and used a 3/8-16 bolt that I cut down to 10mm, with a fender washer to make it a stiffer mount.
Hope you find it helpful. If you download and use the part, please post a picture in the Make section.