Phone Mag Mount to Ballhead Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts a Wizgear UG-Air-vent-Magnetic-mount to any standard tripod head or mini ball head like this one Giottos mini…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Adapts a Wizgear UG-Air-vent-Magnetic-mount to any standard tripod head or mini ball head like
this one Giottos mini ball head MH1004-320.
Print instructions
Adapts a Wizgear UG-Air-vent-Magnetic-mount to any standard tripod head or mini ball head like
this one Giottos mini ball head MH1004-320. Provides a quick and simple way to mount your
phone in many different orientations.
Requires a 1/4-20 nut.
Prints well without supports.
</div> Post-PrintingRequires a 1/4-20 nut.
1| Disassemble the mag mount.
2| Slip the 1/4-20 nut into the slot on the printed part.
3| Assemble the magnet plate and rubber cover to the printed adapter using the center screw from the mag mount.
4| Attach threaded stud on the ball head to the nut inside the adapter.
5| Attach the ball head to whatever you choose. It comes with a thread adapter to allow you to use a 1/4-20 machine screw or a 3/8-16 machine screw. For my application I removed part of my dashboard, drilled a 3/8" hole and used a 3/8-16 bolt that I cut down to 10mm, with a fender washer to make it a stiffer mount.
Hope you find it helpful. If you download and use the part, please post a picture in the Make section.