1 / 4
Fallout Nuka Cola Bottle Cap Wall light
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Embrace the Wasteland and make your own Nuka Cola Bottle Cap LED wall light.
- Ocena
- 5 / 5
- Polubienia
- 247
- Pobrania
- 615
- Wydruki
- 3
- Wyświetlenia
- 3689
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (334)Powiązane
Embrace the Wasteland and proudly display the mark of the best beverage the Wasteland has to offer: Nuka Cola!
Note: This design does require multi-color print capability like a PRUSA MMU or Bambu with AMS.
This simple design can be printed in 2 parts and assembled in under an hour.
Printed parts needed:
- Nuka Cola cap - This is printed face-down in two colors (red and white) both standard opaque colors.
NOTE: Red filament in general is highly translucent and lets a lot of light through. I recommend printing this at 100% infill. If you want more light you can crank down the infill. The example used in the photos was 15% infill and I ended up having to paint the backface black because too much light was coming through
- Nuka Cola back - This has slots to indicate where to run the LED strips and has two holes to insert screws to attach hanging wire for wall mounting. 100% infill.
The two pieces are glued together.
Non-Printed Parts Needed
- Led strip, I recommend the COB type to avoid hotspots.
- USB cord for power or a dedicated power supply
- Some CA Glue
- Hanging Wire
- 2x screws.
Like this model? Want to show your support so I can make more? I accept donations.