1 / 4
Fallout Nuka Cola Bottle Cap Wall light
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Embrace the Wasteland and make your own Nuka Cola Bottle Cap LED wall light.
- Rating
- 5 / 5
- Likes
- 247
- Downloads
- 615
- Makes
- 3
- Views
- 3,689
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Embrace the Wasteland and proudly display the mark of the best beverage the Wasteland has to offer: Nuka Cola!
Note: This design does require multi-color print capability like a PRUSA MMU or Bambu with AMS.
This simple design can be printed in 2 parts and assembled in under an hour.
Printed parts needed:
- Nuka Cola cap - This is printed face-down in two colors (red and white) both standard opaque colors.
NOTE: Red filament in general is highly translucent and lets a lot of light through. I recommend printing this at 100% infill. If you want more light you can crank down the infill. The example used in the photos was 15% infill and I ended up having to paint the backface black because too much light was coming through
- Nuka Cola back - This has slots to indicate where to run the LED strips and has two holes to insert screws to attach hanging wire for wall mounting. 100% infill.
The two pieces are glued together.
Non-Printed Parts Needed
- Led strip, I recommend the COB type to avoid hotspots.
- USB cord for power or a dedicated power supply
- Some CA Glue
- Hanging Wire
- 2x screws.
Like this model? Want to show your support so I can make more? I accept donations.