1 / 1
SKADIS roll holder & hanger for tapes or wrapping paper - REMIX for larger rolls
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since the original only extends about 50mm from the mounting board - extended to about 60mm to fit kitchen paper rolls.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 180
- Wydruki
- 5
- Wyświetlenia
- 1092
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (0)Kolekcje (57)Powiązane
Implemented simply by cutting the original in three parts in Prusaslicer and extending the middle part about 1cm. As a downside, the hexagons are now no longer perfectly symmetrical. 😢
Fits very well to the Ikea Skådis board - snug fit without coming loose (at least in my print).
The axle is quite long so it's okay that the wholes in the board don't match the length of the roll perfectly.