D20 keycap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A keycap for cherry style switches in the shape of a d20
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 247
- Wydruki
- 1
- Wyświetlenia
- 1011
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
A keycap shaped like a d20.
It should fit on a cherry style switch. In the pictures included, it fits nicely as the escape key on my keychron K8 keyboard. I have tried it on my wifes ducky keyboard as well, and it seems to fit nicely there.
The pictures for this look a little plain, but my intention is to cast this key in silicone and then make a clear resin version so some RGB can shine through. The version in the images has been lightly sanded with some 400 grit paper.
I have left the faces blank because I printing on an FDM printer, and I feel like any detail would just get lost, but please feel free to remix and add your own stuff (if anybody needs files in a different format, please let me know). If I had a resin printer I probably would have added the dice numbers. But you could add anything really.
One note about the gcode I have supplied. One of the faces on the cap prints a little curved and I think its due to my printing at 0.05 and it cant handle the overhang. If this is a problem, I suggest lowering the detail, or flipping the print over, and adding supports to the underside (this might just have the same issue, but at least it will be on a hidden dice face)