Snapmaker BitBlock/BitBase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a small platform that can securely hold my CNC bits for easy access while swapping them out, but also small…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a small platform that can securely hold my CNC bits for easy access while swapping them out, but also small enough to fit into my tool tray along with the other Snapmaker tools.
I didn't add a slot for the hex key as I store mine separately, but I don't mind adding one if somebody needs it - just leave a comment if you do, and if you find it handy, please remember to leave a like.
Update: Users on theFacebook group requested a second set of slots for spare bits - I created/added v2 which is 10mm wider to allow adequate space for the extra slots. I didn't print this one myself as I don't have need for it, but it should still be equally as stable as v1.
If you do print and use it, please upload a photo as reference for the other users...
(...under the "Post a Make" top right)
Print Settings
Printer:
Snapmaker
Rafts:
No
Supports:
No
Resolution:
High
Infill:
8% to 25%
Notes:
The unit will be ready for use directly off the printer - no need to clean off anything, unless you are printing with a raft.
Category: 3D Printer Accessories