Ender 3 V2 Tensioners X/Y (repurpose original pulleys)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tensioners for Ender 3 V2, original internal pulleys are repurposed. Can be used with idler pulleys >=20T.
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple tensioners for Ender 3 V2. Original internal pulleys are repurposed.
Advantages in comparison with original ones:
- centered to avoid belt rubbing
- compatible with geared pulleys ≥20T
- about 6-7mm of additional Y-axis movement
The goal was to replace the smooth idler pulleys with teethed ones to reduce vibrations during axis moves. But the original tensioners are designed off-center, and i had only 20T pulleys, which led to belt rubbing against aluminium extrusions.
Another big advantage in comparison with original Y-tensioner is that it allows now some additional y movement, because carriage is not colliding the tensioner anymore and there was some spare way for V-wheels.
Spacers for 8.5mm wide idler pulleys are included.
