1 / 1
Bottle Desk Mount V2 — zdjęcie 1

Bottle Desk Mount V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,72 € – 0,88 € netto (bez VAT)

Dla pliku: Desk Bottle Holder V2_0.2mm_PLA_MINI_48m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,80 € netto (środek widełek).

Masa podana przez autora
10 g
Czas druku podany przez autora
48 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This is a bottle holder for a 1 inch thick desk 26mm.

Ocena
0 / 5
Polubienia
16
Pobrania
54
Wydruki
0
Wyświetlenia
488
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

Version 2 is slightly narrower than V1 to have a tighter fit to the desk and to remove the need to add padding for grip.

 

If you want some extra clearance to put on a foam strip to give it more grip, see V1 https://www.printables.com/model/481548-bottle-desk-mount

 

This is a hook that slides on your desk to hold your bottle by the handle for bottles like the LTT Store bottle or the Cirkul bottles. 

 

It fits 1 inch or 25mm thick desktops. It works best if you put some foam tape on the top finger between the printed part and the desk to prevent scratches. It does work without the foam tape, but I don't recommend that. 

 

It should print under an hour on the i3mk3 or the mini.

 

It was tested with a cirkul bottle cap on a filled 40oz ltt store bottle. The dip in the front of the part allows you to leave the flip top from the cirkul top tucked under the handle while hanging. 

Tagi