No Drill License Plate Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adhesive mounted license plate bracket for North American plates.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 804
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently got a new car and live in a state that requires displaying a license plate on the front of your vehicle.
In an effort to avoid drilling into my bumper to mount the license plate I searched for an adhesive mounted bracket to no avail! So I made my own.
The holes are 5.5mm in diameter so that you can self-tap them with an M6 bolt. Use two strips of 3M VHB tape or your automotive body adhesive tape of your choice.
V1: My first iteration, the mounting pads are a little high for my car, and I felt it could do with some light-weighting.
V2: Adjusted the location of the mounting pads to bring them lower. Increased the size of the fillets around the screw posts for stability. Added a chamfer around the outside edge, and skeletonized the face. Added my logo.
Printed at 0.25mm layer height with 20% gyroid infill in Polymaker ASA.