No Drill License Plate Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adhesive mounted license plate bracket for North American plates.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 76
- Makes
- 0
- Views
- 804
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently got a new car and live in a state that requires displaying a license plate on the front of your vehicle.
In an effort to avoid drilling into my bumper to mount the license plate I searched for an adhesive mounted bracket to no avail! So I made my own.
The holes are 5.5mm in diameter so that you can self-tap them with an M6 bolt. Use two strips of 3M VHB tape or your automotive body adhesive tape of your choice.
V1: My first iteration, the mounting pads are a little high for my car, and I felt it could do with some light-weighting.
V2: Adjusted the location of the mounting pads to bring them lower. Increased the size of the fillets around the screw posts for stability. Added a chamfer around the outside edge, and skeletonized the face. Added my logo.
Printed at 0.25mm layer height with 20% gyroid infill in Polymaker ASA.