Commodore C64 MicroLUC cartridge housing case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recently I found some old cartridges for Commodore C64.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I found some old cartridges for Commodore C64. They are working, unfortunately their housings look bad after over 30 years. So I decided to design new enclosures. First of them is a MicroLUC v2 cartridge case. The next one is a case for BlackBOX v4 https://www.thingiverse.com/thing:4695320 or https://www.prusaprinters.org/pl/prints/50931-commodore-c64-blackbox-cartridge-housing-case
Unfortunately, the quality of the printed circuit boards was low in those years, which makes the enclosures slightly different from manufacturer to manufacturer. While designing the enclosures, I based on my devices, so they do not have to fit to your boards.
At the slicing stage I added a decorative strip to the case but it is not obligatory. However, if you want the inscription to be clearly visible, use one layer with a contrasting colour as its background.
You may also find the pin for reset button.
Print instructions
Printer Brand:
Prusa
Printer Model:
I3 MK3S
Supports:
Yes
Resolution:
0.15
Infill:
25%
Filament Brand:
Plast-Spaw
Filament Color:
Multicolour
Filament Material:
PLA
Misc Notes:
Print the case halves face up and use the supports for the inside. I suggest to use 3-4 perimeters.