Ubiquiti UBNT ToughSwitch EdgeSwitch 5XP low cover case houseing enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couple months ago I published a project of the top shell of enclosure of EdgeSwitch (vel ToughSwitch), from UBNT:…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 43
- Wydruki
- 2
- Wyświetlenia
- 483
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Couple months ago I published a project of the top shell of enclosure of EdgeSwitch (vel ToughSwitch), from UBNT:
https://www.thingiverse.com/thing:4372312
https://www.prusaprinters.org/prints/50950-ubiquiti-ubnt-toughswitch-edgeswitch-5xp-top-cover
I did it because rubber coating of the enclosure dissolved after years and turned into sticky pulp. Right now I finished works on lower shell. Enjoy!
I also added feet and hangers which you can print and superglue to the shell underneath, in specially prepared holes.
Print instructions
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
25%
Filament:
Plast-Spaw PLA ASA PETG
Notes:
Use supports under front edge and upper overhangs. Take a look on the attached pictures - green are supports.