Clamp-on Trash bin, print in place, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,91 € – 3,56 € netto (bez VAT)
Dla pliku: Clamp-on trash can 18mm_0.3mm_PLA_MK3S_2h38m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,23 € netto (środek widełek).
- Masa podana przez autora
- 53 g
- Czas druku podany przez autora
- 2,63 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A Trash bin that can be clamped on a work table
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another way to attach a trash bin to your workbench is by using this method. The design allows for vertical orientation printing without the need for supports, with the lower (flat) side facing down.
The flat side of the bin features a fillet, which helps reduce the chances of warping. The opposite side of the bin is rounded, making it easy to print and can also serve as a funnel for emptying the contents.
These clamps are specifically designed to fit standard MDF boards that are 18 mm thick. Additionally, I have included a version for 36 mm thick MDF boards. For other dimensions, the original file is provided so that you can modify it according to your needs.