Voron 0.2 LMF200 LDO PowerSupply Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix allows you to fasten a 200w PSU unit to the bottom of a Voron 0.2 without having to use adhesive tape.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 126
- Wydruki
- 3
- Wyświetlenia
- 1131
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a bracket adapter for mounting a Mornsun LMF200-23B24 power supply to the bottom of a Voron0.2 3d printer. V1 is adapted from the PSU_bracket_Voron0.2-4.6mm_heat_set_insert.stl model that jrdn8056 created. V2 was created from scratch
You'll need m3 screws to attach the psu to the bracket, then the standard m2 nuts and bolts to the frame.
UPDATE: 10/23/23 WARNING This bracket is not compatible with the front skirts of the 0.2. I had thought the points would work, but after printing the skirts, it doesn't line up. You could drill holes in the printed parts to get them to work, but thats less than ideal. I'll update the model to be compatible soon.
UPDATE: 11/1/24 V2 has now been created after a small wait. :)
It is a little tight for the wires on the PSU but it works with skirts.