1 / 3
Clamping device for LED lamp for 42 mm diameter pipe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamping device for LED lamp for 42 mm diameter pipe
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (26)Powiązane
Simple clamping for LED lamps which has to be mounted on 42mm pipes.
It has two parts for better contact with pipe's surface.
I used PETG, 0.2mm leyer height.
Both parts have 4mm hole in which is possible to put heat inserts. I used M3 inserts and screws, but can be used M4 screws with nuts, without using heat inserts.
Red part is only for testing reason.