Coin Pusher Towers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some helpers for making coin towers in a coin pusher. 1, 6, and 8 coin versions.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
These are helpers for making coin structures in a coin pusher. 1, 6, and 8 coin versions. All should work with quarters and most tokens.
* Included a regular and twisted version for 6 and 8 coin towers.
* Included several wall versions for the 6 coin set (Straight, Curve, S-Curve).
-- All should print without supports, and brim shouldn't be needed.
-- 1 coin version, print upside down (funnel down). I found that I have to print at 50% speed to get the funnel to print out smooth.
-- 6/8 coin tower versions print right-side up. There is a removable plug to help with adhesion.