Big first layer bech(y)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Test to check your bed level status using the benchy first layer. Couldn't eport as .stl sorry.
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 244
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
So I did this for myself to check how well callibrated my bed is, but thought to share it here and see if people like it and have fun with it. I printed this at 15mm/s with my Ender Neo. Line width I've used is 0.5 with nozzle size of 0.4, and layer height was 0.3. Next time I will try 0.2 height and 0.4 width.
Use this 3mf but change the G code to match your configuration, I couldn't save it or export it as STL because I sliced it in Prusa Slice (maybe I'm missing something, let me know)).
Showing the G code in pictures section so you know how the project is set up (using m420, not g29, keep that in mind)
Hope someone print this!!
Note: As far as I know, the Benchy model is a generic one that can be remixed and shared at will, but someone let me know if i'm breacking any rules by uploading this single layer.