Big first layer bech(y)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Test to check your bed level status using the benchy first layer. Couldn't eport as .stl sorry.
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 38
- Makes
- 1
- Views
- 244
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
So I did this for myself to check how well callibrated my bed is, but thought to share it here and see if people like it and have fun with it. I printed this at 15mm/s with my Ender Neo. Line width I've used is 0.5 with nozzle size of 0.4, and layer height was 0.3. Next time I will try 0.2 height and 0.4 width.
Use this 3mf but change the G code to match your configuration, I couldn't save it or export it as STL because I sliced it in Prusa Slice (maybe I'm missing something, let me know)).
Showing the G code in pictures section so you know how the project is set up (using m420, not g29, keep that in mind)
Hope someone print this!!
Note: As far as I know, the Benchy model is a generic one that can be remixed and shared at will, but someone let me know if i'm breacking any rules by uploading this single layer.