1 / 1
KitchenAid Bowl Storage Organizer i3 Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified base plate of @djvt724_344877 's model that fits on an i3 build plate
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
@djvt724_344877 ‘s original model didn’t quite fit on an i3's build plate, so I tweaked the design a bit.
The original model was in inches, so I didn't catch that this won't fit a KitchenAid Artisan mixer, which has a 5qt bowl that's slightly narrower at the top than the standard 4.5qt bowls. I can't use it, but I figured I'd share this model so someone else can use it.
Printed with a 1.0mm nozzle I use for draft work. I'd recommend using a slightly smaller nozzle to keep the screw holes a bit cleaner.