1 / 1
KitchenAid Bowl Storage Organizer i3 Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified base plate of @djvt724_344877 's model that fits on an i3 build plate
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 682
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
@djvt724_344877 ‘s original model didn’t quite fit on an i3's build plate, so I tweaked the design a bit.
The original model was in inches, so I didn't catch that this won't fit a KitchenAid Artisan mixer, which has a 5qt bowl that's slightly narrower at the top than the standard 4.5qt bowls. I can't use it, but I figured I'd share this model so someone else can use it.
Printed with a 1.0mm nozzle I use for draft work. I'd recommend using a slightly smaller nozzle to keep the screw holes a bit cleaner.