1 / 7
Din Rail mount for Adafruit arcade and NeoKey boards and buttons — zdjęcie 1
1 / 7

Din Rail mount for Adafruit arcade and NeoKey boards and buttons

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Din Rail mount for four cherry mx style buttons and four 30mm arcade buttons using Adafruit controllers.

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
335
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A Din Rail mount for four cherry mx style buttons using an Adafruit NeoKey 1x4 QT I2C breakout boards and four 30mm arcade buttons using an Adafruit button controller.

You will need to print two tabs for this design.

They can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab.

The NeoKey 1x4 QT I2C Breakout can be found at: https://www.adafruit.com/product/4980.

The four-button controller can be found at: https://www.adafruit.com/product/5296

This can be used with our dark box project instead of the two separate controls.

The project is documented here: https://www.instructables.com/Build-a-Simple-UV-Photography-Box/

or https://www.instructables.com/A-Simple-Rotating-Stage-for-Photography-or-Display/

Category: Electronics

Tagi