1 / 2
BentoBox V2 Button Cap Blank
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want to blank off some of the action buttons on the BentoBox V2, this is for you.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 24mm blank cap for the BentoBox V2 should you want to have 1/2/3/4/5/6/7 action buttons.
How to Fit:
- Remove the key switch from the BentoBox V2
- Fit the Cap Blank in it's place
- Secure with an M3 screw less than 8mm long.
- Print with 4+ perimeters
- Tested at 0.2mm height