Raspberry Pi 4 Case for Pi & Buck Converter - 40mm fan - Direct Prusa i3 MK3 attachment / Wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case made for the Pi4 and space for a buck converter!
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 1122
- Wydruki
- 9
- Wyświetlenia
- 9113
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case can house a Raspberry Pi 4 together with an buck converter (stepdown). That way you can easily connect the Pi to your 3D Printers PSU or any other device that supplies between 5V-40V.
I designed 2 versions of the case, one that will fit any Prusa i3 MK3/S (see photos) and one regular case. You could use the Prusa version and use it as a wall mount as well.
Everything is built to snap fit. You have the option to use screws as well.
The lid has holes for a 40x40x10mm fan.
M3 x 6 mm screws would work best to secure the Pi & Stepdown. For the lid, M3 x 10 (or 12) sunkhead.
The case only works for the Raspberry Pi 4. Take a look here for my old design for other Raspberrys: https://www.prusaprinters.org/prints/4516-raspberry-pi-3-case-for-pi-buck-converter-direct-p
Stepdown Buck Converter I used: https://www.amazon.de/gp/product/B077VW4BTY/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
Short USB Cable: https://www.amazon.de/gp/product/B004CDXH1K/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
40mm Fan: https://www.amazon.de/gp/product/B00NEMGCIA/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1