Decent Espresso Portafilter Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rack to add portafilter storage to a Decent Espresso machine.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1020
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is a rack to add portafilter storage to the Decent Espresso machine. It attaches via the existing case screws and should fit most E61 compatible portafilters.
The model is symmetric and can therefore be used on either side of the machine.
There is a version with and one without an additional protective sheath for a needle WDT tool. The version with the sheath is designed to fit this specific WDT tool.
The idea is inspired by this model but it's a complete re-model from scratch since I din't like the fit of the portafilters in the original and also was afraid of stabbing myself with the WDT tool when reaching for the water tank lever.
Print Instructions
The .3mf project files contain the settings I used that work well.
If you're using another slicer I'd recommend organic “tree” supports over traditional rectangular ones.