A Better Belt Hangar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3-hour-print of a better belt hangar that I think you're really going to like.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 360
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
There are plenty of belt hangers on printables.com. Some were very simple but resulted in the belts hanging off at odd angles. Some were more complicated than I wanted to deal with and required screws, nuts, duct tape, superglue, ratchet straps and other means of assembly. I wanted a narrow form factor belt hangar that would allow the belts to naturally hang straight down and not bulk out.
Considering the close proximity of walls (everything ranges between 5 and 8 mm) I intentionally printed with no infill and organic supports from the build plate only. Not only did the print take less than 3 hours, it took less than a minute to clean up with no tools!
Anyways, I hope you enjoy my second self-designed model. I'm slowly improving my modeling software skills so if you have a suggestion, please send it my way.
Please be kind to each other.