Prusament Spool Tape Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Tape Dispenser inspired by Prusament Spool design
- Ocena
- 4,8 / 5
- Polubienia
- 128
- Pobrania
- 344
- Wydruki
- 17
- Wyświetlenia
- 1429
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Tape Dispenser inspired by Prusament Spool design
Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space around, so it will be definitly useful for more similar tape types.
You need to print two separate parts - it should be easy to connect them together - they should “click”.
If you are bored, you can use it also as fidget! :)
Printing:
- PLA or PETG (probably better) filament
- Without any support
- 0.20 layer
- Infill 15 % or more
Enjoy!
Spool parts is based on nice model from alex_3dprint and cut part is based on model by Bogomips - kudos for their work!