Prusament Spool Tape Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Tape Dispenser inspired by Prusament Spool design
- Rating
- 4.8 / 5
- Likes
- 128
- Downloads
- 344
- Makes
- 17
- Views
- 1,429
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Tape Dispenser inspired by Prusament Spool design
Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space around, so it will be definitly useful for more similar tape types.
You need to print two separate parts - it should be easy to connect them together - they should “click”.
If you are bored, you can use it also as fidget! :)
Printing:
- PLA or PETG (probably better) filament
- Without any support
- 0.20 layer
- Infill 15 % or more
Enjoy!
Spool parts is based on nice model from alex_3dprint and cut part is based on model by Bogomips - kudos for their work!