1 / 5
12mm Mag Paddles with Joystick addon for Sim Gear Shifters — zdjęcie 1
1 / 5

12mm Mag Paddles with Joystick addon for Sim Gear Shifters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This increases the magnet size from 8mm to 12mm and adds an option for a pinky joystick.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
312
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

This is for many of the same style wheel mounted paddle gear shifters. However I did 

specifically make them for my Magnetic shifters found here… 

https://www.printables.com/model/487560-sim-racing-magnetic-paddle-shifters

This mod increases the magnet in the paddle from 8mm to 12mm. This greatly improves the feel and “Snap” of the paddle. I also included a backside mounting plate option that will house an Arduino style “Thumbstick”  I found here…

https://www.amazon.com/dp/B0B5GLYPLT?psc=1&ref=ppx_yo2ov_dt_b_product_details

Opens up a plethora of options from gas and brake to Looking around. 

I split the mounting plate so that the flat side of the joystick enclosure could be placed down for printing. Refer to picture.

I can easily make a special option or configuration if you would like. Always up for a challenge. All work is free of course.

Here is a short video…

Tagi