12mm Mag Paddles with Joystick addon for Sim Gear Shifters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This increases the magnet size from 8mm to 12mm and adds an option for a pinky joystick.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
This is for many of the same style wheel mounted paddle gear shifters. However I did
specifically make them for my Magnetic shifters found here…
https://www.printables.com/model/487560-sim-racing-magnetic-paddle-shifters
This mod increases the magnet in the paddle from 8mm to 12mm. This greatly improves the feel and “Snap” of the paddle. I also included a backside mounting plate option that will house an Arduino style “Thumbstick” I found here…
https://www.amazon.com/dp/B0B5GLYPLT?psc=1&ref=ppx_yo2ov_dt_b_product_details
Opens up a plethora of options from gas and brake to Looking around.
I split the mounting plate so that the flat side of the joystick enclosure could be placed down for printing. Refer to picture.
I can easily make a special option or configuration if you would like. Always up for a challenge. All work is free of course.
Here is a short video…