HSW Hammer holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hammer holder for Honeycomb Storage Wall. Versions with both inserts & hexagon plugs; and in standard position & rotated
- Ocena
- 4,926 / 5
- Polubienia
- 195
- Pobrania
- 1625
- Wydruki
- 33
- Wyświetlenia
- 3505
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Hammer holder for Honeycomb Storage Wall. Fits hammers head up to 23mm wide. It comes with 4 different version - with either inserts or hexagon plugs; and in either standard position or rotated (in case you have mounted your wall in a non-standard 90° rotation).
Remixed from @FrankH's Hammer mount mid sized.
Print instructions
Can be printed in PLA or PETG, without support except of “HSW Hammer holder - insert” that requires support below the insert.
I printed mine in PETG with 0.6mm nozzle with layer height 0.4mm with a very satisfactory results; however, any other combination of material, nozzle diameter, and layer height should work - this is a very simple model, so there are basically no restrictions.