HSW Hammer holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hammer holder for Honeycomb Storage Wall. Versions with both inserts & hexagon plugs; and in standard position & rotated
- Rating
- 4.926 / 5
- Likes
- 195
- Downloads
- 1,625
- Makes
- 33
- Views
- 3,505
- Reviews
- 27
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Hammer holder for Honeycomb Storage Wall. Fits hammers head up to 23mm wide. It comes with 4 different version - with either inserts or hexagon plugs; and in either standard position or rotated (in case you have mounted your wall in a non-standard 90° rotation).
Remixed from @FrankH's Hammer mount mid sized.
Print instructions
Can be printed in PLA or PETG, without support except of “HSW Hammer holder - insert” that requires support below the insert.
I printed mine in PETG with 0.6mm nozzle with layer height 0.4mm with a very satisfactory results; however, any other combination of material, nozzle diameter, and layer height should work - this is a very simple model, so there are basically no restrictions.