Counting matching models…
A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…
Note, I accidentally generated these with the hex grid rotated, meaning the flat top was facing up. This might be harder to print as the grid will require bridging, but it does use a little less filament and prints a little faster. Some…
The original model has a description of the designer's goals - well achieved! But there is no need to do anything fancy to make this model print - slice it and print it. No supports, no brim (on my Prusa i3S Mk3 with PLA). If you happen…
Update: Realized I modeled the countersunk hole in the wrong hexagon for the four piece connector, added insert-for-countersunk-hole-3-rotated-orentation2.stl which matches the non rotated version of this part. I accidentally mounted my…
I hung my honeycomb wall on a cement wall so i needed to use command strips around the entire thing. The original only worked on the top and bottom sides so i rotated the insert piece so that it would fit on the flatt(er) sides as well.
I created this VW Passat B8 phone tray because my iPhone 8 with cover didn't fit into the standard one. Rotating the USB port by 90° it has space for phones with a length of up to about 15 cm which is about 11mm more than the standard…
Installation instructions is identical as provided by Prusa at : https://help.prusa3d.com/guide/7-advanced-filtration-system-add-on_361946#362491 If there are any hurdles or request, please feel free to reach out in comment or direct…
I designed this rotated S-shaped hook to hang my backpack flat against a closet rod or bar. Unlike a regular S-hook, this one is rotated 90°, so your backpack hangs parallel to coats and clothes – saving space and keeping things tidy.
I found that the original model was very small, rotated, and not flat on the bottom, so I fixed all of that in this model so printing is easier You won't need supports for the model if you are printing them small Remix of…
This is a modification of https://www.thingiverse.com/thing:3001109/files. To allow it to mount nicely on the MK3 frame using the two vertical M3 screw holes. FYI the vertical and horizontal scree holes are 43mm apart. I have added the…
Not just shamelessly stolen from Gurtmail but also heavily inspired by Majyk Oyster's x10 grapes, I realized that JLCPCB can actually produce twice as much for about the same price. This obviously depends on the used material. So, after a…
Hi Internet Sim Racing Fans, Another quick upload by request. This is a remix of my original 70mm PCD Thrustmaster hub adaptor. Except this one is rotated 30 degrees to fit this…
With the original version, tightening the holder into the arm on the printer resulted in the roller bearing surface being on the bottom instead of the top. Backing out the holder so the roller was on the top resulted in it being so loose…
Remix of the V2 Delta-P duct rotating the inlets to even the airflow. For installation details detail see original model by teookie. STEP file included. Print in ABS/ASA with 4 perimeters, no supports needed.
I found that even with good layer adhesion the original model was not very strong because all forces were being applied in the same direction as the layers instead of in the direction perpendicular to the layers. I remixed the original…
I use https://github.com/eth0up/prusaslicer-3dprintremote which can take the URL of an STL and slice/print/upload to the printer from a web interface, provided that a model is already in the correct orientation.
I needed to mount a new Unifi Protect G4 Instant Camera on a wall, but I need the camera turned to view sideways along the wall. I found a suitable wall mount on Thingiverse by darklis: https://www.thingiverse.com/thing:5393420…
I had to install a printer the other way round for now, so to keep using the screen I needed a new bracket. This is one of my first models ever, so please excuse if things could have been done better/other way, however for my purpose it…
Rotated mount for filament runout sensor to fit in tight enclosure
Same as the original file, just rotated 90 degrees. I don't know if it was the model or the print, but the 'handle' part of the spring needed some persuasion to be broken free. For what it's worth, I didn't have the problem with the…
In order to accomodate the brush and a dustpan, my solution was to rotate the broomholder and add a hook. Mounts to two 4mm countersink screws (with 7-8mm heads). Also the gear is now full.
A cool geometric lampshade. It's made to fit on a table lamp base, but could also fit on a ceiling hanging light fitting. Designed in OpenSCAD. The main dimensions are parameters at the top of the scad file and are easy to mess around…
I wanted to print a portable eurorack case that could could be powered via a USB power bank and played on the go, so here's my 38HP travel skiff! I utilized the rotated 4HP 3U for power, multiple, and mute modules. No supports needed, but…
Rotated the bracket for the Q2 Box 4 to 1 Splitter/Manifold to horizontal so that the 4 PTFE tubes entering the manifold have a lesser radius curve and a longer ‘straight path’ before reaching the manifold. Others found this orientation…
Modification of https://www.printables.com/model/74422-raspberry-pi-3b-heatsink-case-for-prusa-mk3s-rotat with 30x30 fan mount added. M3x10 screws were used (and painted black with marker) + M3 nuts to mount fan. If your fan has low…
Variety of lengths: Rotated Insert Hook 17mm Rotated Insert Hook 25mm Rotated Insert Hook 30mm Rotated Insert Hook 35mm Rotated Insert Hook 40mm STEP files included for remix support not needed if print orientation like in the picture.…
Took the remix of this and rotated parts so support is no longer needed.
The STL file contains a collection of buckets in different sizes with OG Hexagons. Depending on the bucket sizes and number you want to print, you can split STL to individual objects. Open the file in Prusaslicer, right-click the model.…
Rotated Insert for Idiots like me who mounted their honeycomb wall wrongside up
Maybe you print it in two parts (lay it half cutted sideward onto the printing-bed) and glue both parts together after printing. I never printed it by myself so far (I only implemented the remix because of a user-suggestion).
A cool geometric lampshade. It's made to fit on a table lamp base, but could also fit on a ceiling hanging light fitting. Designed in OpenSCAD. The main dimensions are parameters at the top of the scad file and are easy to mess around…
Cable management for HSW for placing the cable at the top or bottom of the HSW.
I rotated the threads of the bottom piece 7 degrees so that the dot on the top piece lines up centered when twisted on.
Rebuilt from step file of Honeycomb Storage Wall Insert-Full and copied the measurements of the original base by GunplaMark! Now you can choose the proper one for however you mount your HSW.
STEP files included for remix support not needed if print orientation like in the picture. Please share your makes Have fun :)
This adapter enables mounting of the G4 Instant in a corner 22.5 degree angle rotated down
printed with ABS No Supports 40% infill Voron PIF settings
This model is compatible with the lego system.
STEP files included for remix 2 options of print orientation Please share your makes Have fun :)
Pull copter ring rotated 90 degrees. Not tested. If you print it, please post a make ;)
I wanted to build a new “Honeycomb Storage Wall,” but I was asked to avoid drilling any holes so it could be removed without leaving any marks. To solve this, I designed a bracket based on the hollow inlays, which can be easily attached…
The Universal Scraper rotated, so you don't have to rotate it
Rotated insert for people who have installed their HSW wall with pointy side up. This remix just makes the adhesion a bit better. Original model has a lot of small parts that are not printing well at large volumes. So trimming the base a…
Remix of Staggered print sheet holder shorty 6 x 100 mm - OG HSW Hexagons 90° rotated
Rollup Dice Box - Tower Core by 3D Printy Remixed by chuyskywalker A version rotated to fit the base made by 3D Printy. EDIT: Fixed the top part of the tower core, so that the notch is oriented corrected.
REMIX OF https://www.thingiverse.com/thing:2996289 Rotated the piece the spring goes into so the fingers will be pointing to the side and also a version where the fingers are pointed in the same direction as how it looks on their shirts…
This is a modification of thing "Rattlesnake Rattle" by trishabelly thing 70991. I had a bunch of problems printing the original because some of the parts were floating above the bed. Split is the original cut in half and the two parts…
support not needed if print orientation like in the picture. Please share your makes Have fun :)
Mount for Unifi Cloud Gateway Ultra (UCG), designed for SKÅDIS.
I use https://github.com/eth0up/prusaslicer-3dprintremote which can take the URL of an STL and slice/print/upload to the printer from a web interface, provided that a model is already in the correct orientation.
360° wheel - needed: 1x bearing 608zz 3x screw M3 30mm 1x screw M3 20mm 4x nut M3 4x wood screw (depend on your project) Standard wheel - needed: 1x bearing 608zz 3x screw M3 30mm 3x nut M3 4x wood screw (depend on your project)…
Rotated Heart Bowl - Turned 180° The beautiful, unique rotated heart bowl. A fast printing bowl with a special shape. The bottom is a rotated heart and the upper heart goes in the opposite direction. Dimension: 140x 130x 40 Print: No…
Support for two pliers to be stored on the honeycomb system. The slot for each one measures 12mm (0,472") x 37,6mm (1,48") Note: It is honeycomb wall is 90° rotated.
Remix, this is the description from the original -- Reuse old pegboard dual/fork attachments in the Honeycomb Storage Wall. Both two and four H4 Inserts Supported (M3 probably fine). Printed in PLA but PETG fine. 0.6mm nozzle, 0.3mm layer…
I made this for own use. Enjoy and download
Original design of Creality K1 / K1C / K1 Max Spool Roller v2 does not compatible with K1 SE Side Filament Mount (see photos), that's why i remixed Maximus' model
This is just a rotated version (15 degrees from the hexagon) of the Hexagon Hook for Prusa Mini Base designed by Yasir Bilgic The original model wasn't exactly in a vertical position when placed on the leg. I just rotated 15 degrees the…
GoPro_Like_Joint_Case_Clip-90°-rotated
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Remarks The new location…
Hi Internet DIY Sim Racing Peeps... This was a message request for a mod to the Thrustmaster 70mm hub adaptor by SpaceKnight. It's the 4 screw option for a project he's working on and wanted it 90degree rotated for his mounting needs. By…
Firefly 1S FR16 Nano Baby Quad - battery holder GNB 720mAh - rotated 90 degrees.
Just added a rotated HSW insert at the back :-) Printed on PLA or PLA+, high speed fine, I print it wit support flat on the diagonal slope.
EN: This remix is based on the Divider for IKEA Kallax Drawer by gskollnau . The original model includes two heights (100 mm and 50 mm) and three division types (quarter, eighth, and sixteenth). It was missing one variation — the eighth…
updated model to support the V3 NoIR wide camera
This sleek and functional Pop Funko holder is specially designed to integrate seamlessly with the honeycomb storage wall to display your collection. Perfect for collectors who want an organized yet visually appealing display solution!…
Thanks to cunicode for this great design! http://www.thingiverse.com/cunicode/designs I needed a solid stl to print it in "Vase mode" or "Joris Mode", and here it is. Category: Bracelets
HSW Corner joiner - connectors rotated 90° - Fixed for Bambu Studio and other slicers. SSD holder can be found at : https://www.printables.com/model/1300324-hsw-ssd-or-nvme-holder-with-usb-a-and-c-caps-for-h
support not needed if print orientation like in the picture. Please share your makes Have fun :)
HSW shot glass holder, Alt Rotated for Honeycomb Storage Wal l. Comes in 28mm, 36mm and 41mm. Bambu Labs PLA Basic Grey, 0.4mm nozzle, 0.2 mm layer height. Supports needed for Hex connection. Used default Bambu labs support settings,…
I took the skadis mag holder made by Inspir0n and rotated them by 45°
The original connector only allowed the USB C cable to be connected on the front/back of the babyphone holder. This didn't fit in our case, as we had a wall behind the holder. I simply rotated the base to allow the USB C cable to be…
Same as original. Print settings: 15% cubic infill, 0.12 mm layer height, 0.4 nozzle, 5 walls.
To avoid major print issues, the die is 2cm x 2cm x 2cm. If you want to, you can scale it down in your slicer to 75% scale, which is the size of a standard die. (1.5cm x 1.5 cm x 1.5 cm) It is also recommended to clip off the corners, as…
May be you like to use Eva 3 carriage, but is not possible to mount it in your current printer, with this some modifications yo can change the point for belt attachment, and mount an Orbiter extruder simply turning it 180 degrees over Z…
The greater-than sign is a mathematical symbol that denotes an inequality between two values. The widely adopted form of two equal-length strokes connecting in an acute angle at the right, >, has been found in documents dated as far back…
same as origin but base is rotated by 90
The Easyfeed always makes a mess. The flakes fall to the side or stick and rot because of the condensation on the chute or funnel. With this rotated placement of the Easyfeed, that is now a thing of the past. Fits into the existing cutout…
Modern Vase, normal and rotated. Print in Vase Mode --> cut off the top.
The Ploopy A+ is a great trackball, but by default the scroll knobs are at the bottom, requiring you to tuck your thumb under your hand to use them. Or to move your hand entirely. Both are uncomfortable, in my opinion. This base rotates…
# RC3S - Rotated Customizable Spool Support Structure --- ### Remixed from 3 Sources: - [Anycubic Kobra 2 Pro - Rotated Spool Holder - V1](https://www.thingiverse.com/thing:6387319) by **Sbaro89** - [Anycubic Kobra 2 - Rotated Spool…
I wanted to be able to mount my buffer outside of my (old-school Lack) enclosure. I first tried the hanging mount, screwed into the tabletop that forms the bottom of the enclosure, but it required the tubes to have to twist quite a bit.…
Inner Diameter = 28mm , my glue is 26mm. I think its common size for GlueSticks.. 12/02/2025 - Rotated Insert for GlueStick or Anything else diameter 42mm
Use this only if you have a rotated HSW. Open the file in Fusion and set the required size by specifying the number of “units” (the number of hexagonal cells) in solid > modify > change parameters Use the clips and studs from the original…
It is a redesigned model and similar to the original, but with the UBBI rotated 90 degrees to be able to connect the runout sensor in front using this UBBI model . This is the filament HUB model used in the photo. It does not require…
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Some spools are less wide…
For public library print
..first.. .its a clone of the SK-Go² duct for BL touch and the ones Ernest put on github... ...so if you can help me with the thing numbers I can also put tin the remis information. I just couldnt find them.... .now to the duct... ...for…
ClassicGOD's awesome deckmate kickstand, but the interface is rotated 90 degrees so that's compatible with my steamdeck case backplate During bumpy rides, the deckmate sometimes decouples when I was using the stand The original top part,…
The arm for the original/parent model did not allow the tool to align properly. This version has the screw thread rotated 100º so that the switches are top centred.
In the original Railcore II design the X axis travel is limited by part of the Z yoke blocking the heatsink fan on the low side of the X axis. On the high side of the X axis, is the part cooling fan that collides with the the Z yoke. This…
Rotated version of the Pi Zero mount.
I use https://github.com/eth0up/prusaslicer-3dprintremote which can take the URL of an STL and slice/print/upload to the printer from a web interface, provided that a model is already in the correct orientation.
Someone asked if I could create a version of the GB Operator Skadis mount rotated by 90 degrees — so I did. This mount allows multiple GB Operators to be used side by side, even with the USB cable plugged in. It keeps everything neatly…
I have an older Version of an Ikea Galant Rolling Drawer. After moving to an new home I lost the bar that interconnects the diallock with the drawer lock on the side. Ikea kindly sends out spare parts, but the newer revision has some…
A short hook for suitable for a HSW wall rotated by 90 degrees I printed it vertical on Prusa Core One so the printing lines make it lock once inserted and the flat surface is the most visible one
I have created this piece to fulfill my needs on a shower column from Leroy Merlin, precisely the item Column without battery Trend Kuchinox, purchased in Poland. The outer diameter of the item support is 40mm and it is smaller than the…
A small can holder for the HSW rotated
![Raspberry Pi 3B+ Fan Case for Prusa MK3S (Rotated) [Fusion 360 source]](https://media.printables.com/media/prints/237162/images/2162589_926fa7b5-c1d7-4a9c-8dc7-bf9f5fdf19dc/fan-case.jpg)
