Fan Rotated 90deg- Prusa Filtration System Housing (Remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan mounting rotated 90 deg, filter and housing mounting unchanged.
- Rating
- 4.833 / 5
- Likes
- 50
- Downloads
- 287
- Makes
- 18
- Views
- 985
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Installation instructions is identical as provided by Prusa at : https://help.prusa3d.com/guide/7-advanced-filtration-system-add-on_361946#362491
If there are any hurdles or request, please feel free to reach out in comment or direct message.
In response to confusion of orientation on my initial posted 3mf and gcode files, I have decided to remove them and leave only the STL file.
*My 3mf file and gcodes were orientated and set identically to prusas original file. Prusa tends to have aggressive setups and is not uncommon to adjust them.
Prusa’s settings for the original print are:
- Print settings: 0.30mm Draft
- Filament: Prusament PETG
- Printer: Original Prusa MK4 0.4 nozzle
- Supports: None
- Infill: 15%
- Brim: unchecked
*Please adjust as necessary and consider uploading a “User print file (.gcode)”.
** I highly recommend @DaHouzKat’s uploaded user print and their matching ducting model.
I hope this proves to be useful!
Thanks for viewing my first “Published” Remix here on printables.com!