FRC Spark Max Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Spark Max motor controller by team Raven Robotics #1288
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
About the mount:
We made a Spark Max mount that allows easy access to the controller without hassle. the bottom piece is mounted with 3M tape to the robot while the Spark Max is held in with a top mount with 2 screws. This helped us swap motor controllers quickly and easily in case we had problems.
Assembly: use a soldering iron to heat press 2 nuts into the bottom mount holes. Then, 3M the bottom mount to the surface and screw in the top mount.
Hardware needed:
- 2x M5-0.8 x 12mm Screws (https://www.homedepot.com/p/Everbilt-M5-0-8-x-12-mm-Combination-Pan-Head-Stainless-Steel-Machine-Screw-2-Pack-801088/204274568)
- 2x M5-0.8 Nuts (https://www.homedepot.com/p/5-mm-0-8-Stainless-Steel-Metric-Hex-Nut-2-per-Pack-801008/204274112)
Who we are:
We are the Raven Robotics #1288, a high school robotics team that participates in the First Robotics Competition every year. We work as a team to build robots and community through our outreach and participation in many events throughout the year.
Team Links
To learn more about FRC, visit https://www.firstinspires.org/robotics/frc