Makita Drill Case Compartment Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The whole idea behind this print was to stop my drill bits/impact bits from falling into the other compartments, I…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The whole idea behind this print was to stop my drill bits/impact bits from falling into the other compartments, I would open the lid on my drill case and find a heap of my smaller drill bits would fall into the back compartment making me have to go searching for them.
So I came up with the idea of keeping the section dedicated to drill bits/impact bits so I designed a lid to close it off so nothing to fall out.
NOTE: To fix the hinge and step to the case I just used double sided tape just in case I decide to change my layout or something about the lid, or you don't have these concerns then I guess you could just glue it in place.
How I Designed This
Overall design of the compartment
The latch just slips onto the lid.
To join the lid to the hinge I used a 3mm metal rod, however you may be able to use a toothpick, or print a rod.
Hinge and step made to match the 5mm radius in the compartment.
NOTE:
To measure the radius I used the fillet/radius gauge kit I made, which is here on Printables to download.