Makita Drill Case Compartment Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The whole idea behind this print was to stop my drill bits/impact bits from falling into the other compartments, I…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The whole idea behind this print was to stop my drill bits/impact bits from falling into the other compartments, I would open the lid on my drill case and find a heap of my smaller drill bits would fall into the back compartment making me have to go searching for them.
So I came up with the idea of keeping the section dedicated to drill bits/impact bits so I designed a lid to close it off so nothing to fall out.
NOTE: To fix the hinge and step to the case I just used double sided tape just in case I decide to change my layout or something about the lid, or you don't have these concerns then I guess you could just glue it in place.
How I Designed This
Overall design of the compartment
The latch just slips onto the lid.
To join the lid to the hinge I used a 3mm metal rod, however you may be able to use a toothpick, or print a rod.
Hinge and step made to match the 5mm radius in the compartment.
NOTE:
To measure the radius I used the fillet/radius gauge kit I made, which is here on Printables to download.