Table Saw height gauge tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a simple device to set the height of my table saw. If used properly it can be quite accurate.
- Ocena
- 4,667 / 5
- Polubienia
- 85
- Pobrania
- 211
- Wydruki
- 3
- Wyświetlenia
- 1481
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
t I designed a simple device to set the height of my table saw.
If used properly it can be quite accurate. But If you want a perfect result you ofc. still need to plane or grind the last few 1/10 mm down per hand.
In addition you will need a M6 x 20 Machinehead screw and a M6 Nut. If you dont have these you may also print these parts but they might not last a long time if you dont use a very tough material.
Have fun and keep printin!
Small tipps:
- I designed the adjustable part so you can take the height without any measuring.
- Check, where you are measuring the Saw teeth and keep the design of them in mind ,-)
Model Wood: You can screw this base to a piece of wood if your table saw is not very plane in the middle (Shit happens). Designed for 4 x M3,5 screws.
Update 26.06.2023: Added a Set for M5 Screws.