Table Saw height gauge tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed a simple device to set the height of my table saw. If used properly it can be quite accurate.
- Rating
- 4.667 / 5
- Likes
- 85
- Downloads
- 211
- Makes
- 3
- Views
- 1,481
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
t I designed a simple device to set the height of my table saw.
If used properly it can be quite accurate. But If you want a perfect result you ofc. still need to plane or grind the last few 1/10 mm down per hand.
In addition you will need a M6 x 20 Machinehead screw and a M6 Nut. If you dont have these you may also print these parts but they might not last a long time if you dont use a very tough material.
Have fun and keep printin!
Small tipps:
- I designed the adjustable part so you can take the height without any measuring.
- Check, where you are measuring the Saw teeth and keep the design of them in mind ,-)
Model Wood: You can screw this base to a piece of wood if your table saw is not very plane in the middle (Shit happens). Designed for 4 x M3,5 screws.
Update 26.06.2023: Added a Set for M5 Screws.