MicroBurner - Ender 3 & 5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate and Hotend part for ender 3 / 5 using the MicroSwiss DD
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 456
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Micro Burner - for MicroSwiss DD
A modified mount to fit a Voron Stealth Burner on your Ender 3 or 5 using the MicroSwiss DD
Ender 3 - this comes in a few flavours to choose from
No-Probe
BL Touch
Inductive
There is a small clamp on the right to clamp it to the frame of the MicroSwiss. This holds it nice and firmly as I notice flex in this area in the original design.
Ender 5 - this only had the single flavour currently
BL Touch
I also modified the latest rear / part cooling part for the StealthBurner from Voron to fit the MicroSwiss DD, ensuring compatibility with all the other original StealthBurner parts
Additional parts you will need for this install...
6 off M3x5 5 / 6mm long Threaded inserts
4 off M3x8 BHCS
2 off M3x20 BHCS
these are for mounting the StealthBurner
other fixings... (originally on your ender 3 / 5)
2 off M3x6 FHCS
3 off M3x6 BHCS
these are for mounting the mounting bracket to you MicroSwiss.
printer settings that I followed are the Voron settings.
4 perimeters
5 top / bottom
40% infill
0.2mm layers.
for best results I would recommend PETG, ABS or ASA
happy printing!